Parker Mobile Vane Pump - Series T6*M - Services in Delhi India

Product Description Parker Mobile Vane Pump - Series T6*M

Parker Mobile Vane Pump – Series T6*M

The high pressure design reduces installation costs and provides extended life at reduced pressure. These vane pumps have been specially designed for high/low circuits. The combination of different cartridges in double and triple pumps allows low flow at high pressure and high flow at lower pressure. This is the intelligent way to optimize your circuit design. The pump also allows a very fast pressure cycle change with a very precise flow repeatability.

Softech Hydraulic is a reputed repair service provider of parker hydraulic pumps and motors within thier entire range.

Technical data

Pump Type: Double, Single, Triple
Flange Size: SAE B 2 bolts, SAE C 2 bolts, ISO 4 bolts – 250 B4 HW
Intermittent Outlet Pressure Port 1: 90 to 300 bar
Continuous Outlet Pressure Port 1: 75 to 250 bar
Intermittent Outlet Pressure Port 2: 210 to 300 bar
Continuous Outlet Pressure Port 2: 160 to 250 bar
Intermittent Outlet Pressure Port 3: 210 to 275 bar
Continuous Outlet Pressure Port 3: 160 to 240 bar
Rated Speed: 2000 to 2800 RPM
Brand: Denison
Displacement: 10 to 268,7 cm3/rev, 0,6 to 16 inch3/rev
Flow Rate: @2000 rpm: 20 to 537 L/min, @ 2000 rpm: 5 to 142 Gal/min

Operating Pressure: depending on size: up to 275 bar, depending on size: up to 3900 psi
Operating Speed: 400 to 2800 RPM
Operating Temperature: see catalogue
Maximum Fluid Temperature: see catalogue
Minimum Fluid Temperature: see catalogue
Weight: 16 to 43 kg
Width: 175 to 213 mm
Height: 135 to 188 mm
Length: 233 to 316 mm
Port Size: suction port: 1″ 1/2 to 3″, pressure port: 1″ to 1″ 1/2

Products/ Stock We offer.

A10VSO1	AR16/22	AR37/56	AR70/90/145
A10VSO2	DSG01/03	DSHG04/06/10	BSG03/06/10	BG03/06/10
A10VSO3	MSW01/03	MRP01/03	MSA01/03	PVR-1T

Related Products:-

Parker Variable Speed Vane Pump – Series T7

T7 variable speed vane pumps especially dedicated to provide an ideal solution for modern servo controlled machines.

Parker Drive Controlled Pump – Series DCP

Parker’s Drive Controlled Pump system solutions are variable-speed hydraulic pump systems which provide high energy efficiency. They essentially consist of an AC drive unit, an asynchronous or synchronous motor and a hydraulic pump.

Parker Industrial Vane Pump – Series T6*, T67* & T7*

Hydraulic industrial vane pumps reduce installation costs and drive extended life due to their high pressure capability, up to 320 bar in a small operating envelope. They are optimized for industrial applications.

Parker SDV SINGLE/DOUBLE MEDIUM PRESSURE VANE PUMPS

Fixed displacement pump for applications up to 2250 psi. Single and double pump configurations provide optimized system flow.

Parker Thru Drive Vane Pump – Series T6*R

Our drive train pumps allow the use of vane pump technology with a huge combination of other pumps, supported by SAE A, SAE B or SAE C rear drive.

Parker Mobile Pump For PTO Mounting – Series T6G, T67G

Hydraulic mobile pump T6G & T67G series are specially designed for power take-off (PTO) mounting.